Circuit breakers are engineered to stop the power flow from a building’s main power circuit when too much amperage is being drawn. It is no surprise that a broken circuit breaker can be a huge issue that could lead to blackouts and electrical fires, so it is best to know what to do when your circuit breaker - well, breaks.
If you’re not familiar with electrical box wiring, then we strongly suggest giving us a call so that we can send one of our professional electricians to help replace and repair your circuit breaker in Fort Worth. An electrician will arrive to help you fix your panel box wiring in no time.
If the problem appears to need more than a switch replacement, our skilled staff will be quick to find the true source of the problem and offer further assistance.
The wiring in every building’s electrical box can be different from the last. The building could have different amperage outputs, different wiring, different types of breaker boxes, different amounts of breaker boxes, or a different amount of subpanels. These are only a few different factors that come into play when trying to discern a breaker box’s problem and how to fix it.
Before jumping to conclude that a switch needs to be replaced, you should turn off all of the switches and then turn them back on. If everything seems to be back to normal, then your breaker should be fine. If your device is still off, however, you will have to identify which switch it is.
The easiest way to do this is by turning the large main switch on the circuit breaker panel off again, and then turning the rest of the breakers off. After you turn the main switch back on again, turn the rest of the switches on again, one by one. If the light or appliance still isn’t turning on, then you’ll have to replace that breaker.
We highly suggest that you hire an experienced electrician for any circuit breaker box services. Because you are working with high-voltage equipment, mistakes can be costly and maybe even deadly. Don’t try to fix a broken circuit breaker without the help of a professional.
Our team of trained electricians can help you fix any wiring, replace any breakers, and repair any power distribution panel. Replacing a circuit breaker requires a good deal of safety precautions and a strong grasp on electrical engineering if you want to get it right.
We provide a comprehensive service based on analyzing the breaker’s problem from all angles. If you want reliable and quick repairs and replacements, choose the safest and easiest option for hiring a certified electrician.
Circuit Breaker Replace
Replacing a circuit breaker requires caution. Remember to call an experienced and registered electrician if you don’t feel comfortable doing any of these steps. You’ll need a voltage tester to make sure that electricity is still going into the breaker, and then make sure that you have the proper safety equipment if it does appear to be the breaker that is the issue.
You can start turning off all subpanels and branching breakers, followed by the main breaker. Be sure to wear insulated lineman’s gloves, rubber-soled shoes, and a pair of safety glasses. You will also want to use only insulated tools and stand on a rubber mat to make sure that there’s no chance of getting electrocuted.
If you notice any liquid, rust, charring, moisture, or discoloration near or on the circuit box, call a certified electrician immediately. If you are located in Fort Worth, our professionally trained staff can help you get the comprehensive electrical service that you need.
Next, you should take off the faceplate by unscrewing it and using the “left-hand rule” when opening the breaker panel. At this point, you should double check for any evidence of pests, damaged circuitry, crossing wires, or any strange modifications. Contact a professional electrician immediately if you discover any of these.
Take another moment to make sure that your new breaker is the same amperage and type as the old one. Loosen the screws holding the wires in place within the breaker and separate the breaker from the wires once they are sufficiently loosened. Put the wires in your new switch in the same way as the old breaker and fasten the wires within the new circuit breaker by tightening the screws (but not too tightly!). Then all you have to do is replace the faceplate and then turn the main power pack on, followed by the other switches.
Fort Worth Commercial Electrician To Help Fix My Wiring
If you need help with your wiring or notice any of the issues listed in the last section, we have some of the best-certified electricians in Fort Worth. Safety should be of your utmost concern when it comes to electrical reparations. If you don’t know how to fix a broken circuit breaker and have never seen it been done before, it is highly suggested that you hire a professional. Contact us, and let us know what the problem might be. We’ll send a skilled electrician over immediately to provide a precise and comprehensive service to your commercial electrical breaker box.
Get A FREE Quote By Calling Today!
Fort Worth Commercial Electrician